The quick and straightforward solution. The X400 is a fully assembled large-volume 3D printer loaded with all the features necessary for professional use. Print intricate models up to 390x400x330mm in size with a layer height of down to 50 Microns!
Preconfigured with a 1.75mm Hotends from the world-renowned experts @ e3D, the x400 is compatible with all e3D nozzles sizes for quick printing or to focus on finer details. With an all-new machined aluminum extruder, the x400 can print virtually any material right out of the box – PLA, ABS, HIP, PVA, PET…even TPU!
The x400 has been optimized for professional users, who push the limits of 3D printing in design and engineering roles across all industries – consumer products, automotive, marine, industrial, and fabrication. With its transparent housings, the x400 is also an excellent 3d printer for educational environments – K-12 (Middle School / High School), Community Colleges and Universities.
From Robotics Teams and Engineering Classrooms to the Production Floor, the x400 is built to last with all the quality that we have come to expect from German Engineering! Configured with the technical user in mind, the x400 features machined aluminum components, low-play gears, high accuracy trapezoidal spindles, and hardened guide rods. There are no 3D printed parts to worry about warping or breaking on the x400 – every single component critical to accuracy is custom-machined in Germany for the absolute highest precision possible.
Bundled with everything you need – Full-Enclosure, Dual Extruders, Heated Build Plate, 2x Spool Holders, 2x Build Plate Adhesives, Simplify3D, a SD Card, and even a roll of material to get you printing trouble free right out of the box! Speaking of Simplify 3D and the x400 – it’s a perfect match! Simplify3D is powerful 3D printing software that provides complete control over your print settings, making it easier to consistently produce high-quality 3D prints. Start up quickly with pre-configured settings optimized for the x400, review a simulation of your build sequence in the Preview Mode, and begin your 3D print with confidence.
The electronic components are Arduino-based, and are compatible with all Open Source RepRap firmware, enabling in-house or community-based changes with ease.
|Heated Bed||Yes, separate power source for max heat|
390mm x 400mm x 330mm
15.4" x 15.7" x 13"
|Nozzles||0.25, 0.3, 0.35, 0.4, 0.6, 0.8mm|
Up to 6000mm/m or 100mm/s
Up to 100 microns
|Materials||ABS, PLA, PVA, PET, HIPS, TPU, Carbon20, Woodfill|
|CASE STUDY : AIRBUS HELICOPTER|
|CASE STUDY : MRI IMAGING|
|CASE STUDY : PRINTING WITH POLYPROPYLENE|
|CASE STUDY : DOOR PANELS|
|CASE STUDY : INTERIOR DESIGN|
|CASE STUDY : DOOR HINGES|
|CASE STUDY : CASTING FOR EPITHESES|
|CASE STUDY : CASTING FOR DISTILLERY|
|CASE STUDY: STUDENT FORMULA RACING|
Media The PRotos V3 Kit is a build-it-yourself 3D printer for the...
Media Bundled with everything you need - a Full-Enclosure, Dual Extruders, Heated...
The pinnacle of German engineering. The X500 is a fully assembled large-volume...